Armonicos Co., Ltd.
Act Tower 21F, 111-2 Itaya-machi, Nakaku, Hamamatsu, Shizuoka, 430-7721 JAPAN
|PR message||LISTEN. UNDERSTAND. SOLVE.
We take on the world with our 3D geometry processing technology.
|The Main Item||
|The name of Item||spGate|
All-in-One 3D CAD Data Translator
spGate is a powerful tool to support the manufacturing field with features such as data translation,defect correction, simplifying, and data downsizing.
|The name of Item||spScan|
spScan is a reverse engineering tool specialized in creating a NURBS surface from point cloud data.
The intended surface can be created readily according to purposes such as to “reproduce a faithful shape with little deviation from point cloud using surfaces” or “create a smooth surface with few control points.”
The created surfaces can be exported in a generic CAD format (IGES/STEP) and can be used in a CAD/CAM/CAE.
Surface data resulting from reversing a solid shape can be utilized in a CAD system as solid data.
Drastically Reduce Man-Hours Spent on Reverse Engineering Through Partial Reverse Engineering Features
Are you spending too much time reverse engineering from point cloud?
If a CAD data exists, point cloud data and the CAD data can be compared so that only the surfaces that are different can be reconstructed. Since only the differences are reverse engineered, the man-hours can be significantly reduced compared to reversing the entire model.
|The name of Item||T-Promotion|
Panel-Thickness Evaluation System
The system was developed due to the pressed panel industry’s need to “effectively evaluate the actually created panel’s thickness.”
T-Promotion is a system that can evaluate the rate of change in panel-thickness against the nominal thickness dimension by using polygon mesh data (non-contact measurement data) of the front side and the back side of a pressed panel.
Useful to detect a decrease in panel-thickness and identifying a plastic deformation neck.
|The name of Item||spGauge|
Sophisticated Inspection Tool using Scanned Point Cloud Data
spGauge is an inspection software which uses point cloud data, measured by a 3D scanner, and CAD design data.
spGauge is utilized during the production preparation stage in manufacturing as well as in the prototyping and mass production stages.
Drastically Reduce Prototyping and Production Preparation Time
You can use the color map to visually review erroneous part between the point cloud data measured by non-contact digitizer and the 3D CAD model data.
Alignment that Actualizes a Desired Result
spGauge can perform optimal alignment according to each purpose based upon the experiences and techniques built up in the manufacturing setting.
Extensive Inspection Features Dedicated for Metal Stamping
Comes equipped with a function that can automatically and accurately extract holes, plate stops, plate thickness, and welding points in pressed products.
L. CAD/CAM/CAE SYSTEM
P. ROBOT, AUTOMATION