KYOEI PRINT GIKEN CO.,LTD.
1-21-1 Tamagawa, Chofu City, Tokyo Pref., 182-0025, Japan
|PR message||We’re a mold manufacturer focusing on the design and manufacture of precision press dies. It’s popular with customers in a wide range of fields, such as low-cost dies that can be made from the 90,000 yen range, shortest actual work day 2 shipping dies, blade dies and punch combined processing dies.|
|The Main Item||
Simple punch punching die (FQDC) that can be used from the 90,000 yen level
|The name of Item||Simple punch punching die (FQDC) that can be used from the 90,000 yen level|
The simple punch punching die requires four special screws for setting the upper and lower dies, and can be used by attaching a special attachment made according to the pressing environment. Both the upper and lower molds are lightweight at about 1 kg and can be easily carried by women. The effective processing range is width 150 mm x depth 100 mm, and it will be shipped within the next two days at the longest after receiving an order.
|The name of Item||Steam vent processing mold for plastic resin containers|
At the same time as forming drawing with any shape, steam ventilation holes are machined in plastic resin by shearing the sides. When holes are machined by general press working, there is a risk that scrap will be generated and mixed into the container.However, with this die, it is possible to machine steam vents without generating scraps. It can be produced safely. It is a patent-pending technology.
|The name of Item||Mold for processing steam vents on the side of a plastic resin container|
At the same time as forming drawing with any shape, steam ventilation holes are machined in plastic resin by shearing the sides. When holes are machined by general press working, there is a risk that scrap will be generated and mixed into the container.However, with this die, it is possible to machine steam vents without generating scraps. It can be produced safely. By arranging the steam vents on the side of the shape, (1) the contents are easy to see, (2) the vents are not blocked even if the products with the containers set are stacked, and (3) the area of the vents is small, so it is difficult for flies to enter. There are advantages such as. It is a patent-pending technology.
|The name of Item||Small diameter (Φ0.5) hole drilling die for plastic resin container|
A mold for drilling through holes for small diameter holes (Φ0.5) with a needle-shaped punch in a plastic resin container. Since it is not a sheared structure, scrap is not generated during processing, enabling stable production that does not depend on press accuracy.
|The name of Item||Blade type that does not require a backing plate or carrier sheet|
When cutting with the engraving blade type that punches the contour shape of the product and the punching groove along the contour shape, the engraving blade enters the fine groove after cutting the product, so even if you do not use a backing plate or carrier sheet It is possible to punch out the product without fail. Since the tip of the engraving blade does not touch anything other than the product, it has the effect of reducing wear and damage to the cutting edge.
|The name of Item||3D engraving blade|
With a wire electric discharge machine, a base plate with the same shape as the punched contour shape and an engraving blade with the same shape before blade cutting are processed, press-fitted into the base plate, and then the engraving blade is cut by cutting.
The larger the height difference of the three-dimensional shape, the shorter the cutting time, which enables a significant cost reduction.
Even if the blade is damaged, it can be handled by replacing the engraving blade, reducing the risk of remanufacturing.
|The name of Item||Mirror engraving blade|
It is an engraving blade type finished by mirror cutting with our original method.
The tip of the cutting edge is very sharp and finished only by machine cutting.
|The name of Item||Carbide engraving blade|
Cemented carbide is a material that is difficult to cut because it is extremely hard and brittle, but the latest processing technology has made it possible to cut.
The tip of the blade is extremely sharply processed, making it an area for microfabrication.
Advanced technology is required to achieve this with cemented carbide.
|The name of Item||Wavy engraving blade type|
By making the cutting edge of the engraving blade type corrugated, the sharpness is dramatically improved.
In addition, the blade height can be changed freely, making it easier to separate.
|The name of Item||KPG IoT Solution|
|Details||KPG IoT Solution is a production management system based on FANUC's operation management system MT-LINKi. If the equipment is connected to the KPG IoT Solution (including other bases), it is possible to check the operation status of the equipment and the contents of the alarm in real time, and to receive the data of preventive maintenance and failure prediction of the equipment. In addition, by saving the operating status of the equipment on the server PC, it is possible to analyze the setup time, alarm stop time, processing time, and other work time based on the data, and improve production efficiency.|
A. MOLDS, MOLD MATERIALS
L. CAD/CAM/CAE SYSTEM
Production Control System
N. PARTS PROCESSING TECHNOLOGY
P. ROBOT, AUTOMATION